Falco Tempo Long Booster - 150ml

Falco Temp Long Booster increases the table tennis rubber's overall spin and speed characteristics and creates a charming ball touch.

Experience the unique reliability of the Falco Temp Long Booster, providing consistent performance for 8 to 12 weeks. Unlike regular boosters, it maintains its effectiveness over time. A 150 ML bottle will provide 40-60 layer coatings, ensuring you can rely on its performance for an extended period.

The Falco Temp Long booster is VOC-Free and is designed to comply with ITTF regulations. It's important to note that ITTF rule 2.04.07 states the racket covering shall be used without any physical, chemical, or other treatment. Therefore, we recommend that Falco and all boosters be only used in club and practice play and not in official country or internationally sanctioned tournaments. 

How to use? Watch the video below. 

Manufacturer instructions

 1. Remove any plastic cover or protection sheet from the rubber topsheet. This will reduce strain on the topsheet as the rubber sheet expands with the booster.

2. Apply a layer of Falco Tempo Booster on the sponge. After a few hours, you will notice the rubber sheet 'dome' or bulge slightly due to the expanding sponge. This is a normal part of the process and indicates that the booster is working as intended.

3. After about 24 hours, repeat (2) for 2nd layer of booster to obtain a greater speed glue effect. Chinese rubbers may require a 3rd layer for optimal effect.

4. Allow the rubber to become flat again and the booster to dry. This may require an additional 24-48 hr.

5. Glue the rubber to the blade using any water-based glue.

6. The effect should last around 8-12 weeks. As the effect wears off, remove the rubber from the blade and remove the layer of glue from the rubber.

7. After reboosting, leave the rubber unglued for 24 hours. This allows the rubber to shrink back slightly, ensuring a better fit when you eventually glue it to the blade.

8. Repeat the steps above to reboost your rubber.